Ozone Generator for Swimming Pool

Using a swimming pool ozone generator is one of the most environmentally friendly ways to treat swimming pool water.

Ozone is widely used in swimming pool water treatment as a standard method of pool disinfection. QUANJU as a professional ozone generator manufacturer, we can provide you with swimming pool ozone solutions and we provide maintenance services for all equipment.

Ozone Generator for Swimming Pool:

What is ozone? Ozone is a very reactive gas that can be either man-made or natural. For oxidation, deodorization, bleaching and disinfection.

Ozone is an effective and powerful oxidant, but has a short lifespan. The ozone generator produces ozone gas, which is injected into the pool circulation system to help with residual disinfectant. Ozone is becoming a popular backup for chlorine systems and brine chlorinators.

Add an Ozone Generator to Your Swimming Pool:

It is a natural and powerful treatment method for water treatment, including drinking water such as tap water. This therapy is gaining popularity because its oxidative properties are an effective barrier against bacteria, fungi, germs, organics and viruses. In short, ozone is an effective and efficient treatment method to keep water healthy and clear.

Fruits and vegetables, bottled water, etc. are increasingly investing in this treatment, further proving its effectiveness.

Ozone Generator for Swimming Pool

Advantages of using ozone generator for swimming pool

Reduced Chemical Usage

Ozone ad the primary oxidation in and disinfectant swimming pool, it will reduce the use of chemicals like chlorine or bromine.

Superior Disinfection

Ozone has been shown to be a superior disinfectant to chlorine or chlorine-bromine treatments
To achieve disinfection in a swimming pool application, an applied ozone dosage of 1 to 2 mg/L is usually sufficient to provide effective ozone residual for inactivation of microbes and conversion of residual disinfectants. The actual dosage and contact time required to generate a disinfecting residual will depend upon the water quality and whether the pool is utilizing chlorine or bromine to provide a residual pool disinfectant. A minimum contact time of two minutes is usually sufficient for microbe inactivation and disinfectant conversion.

Enhanced Bather Comfort

The addition of ozone to a swimming pool treatment system has a dramatic effect on bather comfort. Compared to chlorine treated pools, ozone fed pools are far ahead of chlorine injection and dramatically reduces chemical consumption by destroying many of the organics and microorganisms that react with chlorine. The lower chlorine demand allows the pool operator to achieve disinfection with minimal chlorine residual, thus reducing the strong chlorine odor associated with indoor pools and minimizing the amount of chlorine off-gas-which may cause considerable corrosion in swimming pool environments. When ozone is applied, a free chlorine residual of 0.4 ppm is usually sufficient to maintain water quality.

Improved Water Quality

When Ozone is applied to water, a side benefit is an improvement in water clarity.

Ozone Health And Safety

The USEPA proposed human exposure limit to ambient ozone gas is 0.1 ppm for eight hours (time weighted) and 0.2 ppm for 15 minutes.

Any Ozone residual in the contact vessel must be removed before it returns to the pool since off gassing of ozone at the water surface can pose a health hazard. Pools using chlorine as their residual disinfectant may require the Ozonated water to pass through a granular activated carbon (GAC) filter to remove the last traces of ozone. Pools utilizing bromine usually will not require GAC removal of ozone. The excess bromide ion and bromine compounds typically consume all of the available ozone and returns as hypobromous acid to the pool.

Systems using a full or side stream contacting system will require an ozone destruct device to remove ozone from the contactors off-gas.

Ozone Generator for Swimming Pool